Image similar

RP-T2, Thin sheet screw Hexagon head with pressed-on washer, 4.5 x 22 mm, Partial thread (L1), AF 8, E14, Bimetal (stainless steel A2/steel), Nickel strike, zinc plated blue, lubricated, ETA-21/0306, 100 Pcs.

00D179B020-0450222-1
on request
per 100 Pieces
No availability information

Sales data

Minimum order quantity 100 Pieces
Order step 100 Pieces

Description

FIELDS OF APPLICATION:

Fastening aluminium and steel profile sheets to aluminium and steel.

PROCESSING RECOMMANDATIONS:

1. Inserting the screw with increased pressure and low rotation speed (approx. 200 revolutions)

2. Pressure can be reduced as soon as the thread engages. The rotation speed can then be increased to approx. 1600 revolutions.

3. Immediately before the sealing washer touches down, reduce the rotation speed considerably and tighten the sealing washer until it is slightly compressed.

4. Recommended tightening torque for steel substructure approx. 3 Nm, under 0.8 mm material thickness 1 Nm.

Recommended tightening torque for aluminium substructure approx. 1 Nm, under 0.8 mm material thickness 0.5 Nm.

Features

Article number 00D179B020-0450222-1
Code 67075/3
GTIN/EAN 4005674670753
Diameter d 4.5 mm
Length L 22 mm
Thread length L1 19 mm
Height of head k 5 mm
Height h1 1 mm
Diameter dw 5 mm
Diameter dn 3.5 mm
Additional features Thread-free section under the head
Height tn 2 mm
Drilling capacity Component 1 [mm]: Steel 0.4 -1.0; Aluminium 0.5 -1.2 Component 2 [mm]: Steel 0.5 - 1.0; Aluminium 0.5 - 1.2
Height h 3.7 mm
Material Bimetal (stainless steel A2/steel)
Surface Nickel strike, zinc plated blue, lubricated
Drive type AF
Drive size 8
Head shape Hexagon head with pressed-on washer
Seal: Abbreviation E14
Seal: Type Sealing washer
Seal: Material Stainless steel A2/EPDM
Approval ETA-21/0306
Approval with annex Z-14.1-4, annex 3.304a/3.305a Z-14.1-537, annex 3.2.21/3.1.30 ETA-21/0306, annex 28.10/28.11/28.20/28.30
Drilling capacity 1 x 1.0/2 x 0.8 mm
Processing speed 1,600 U/min
Clamping area on steel 1 - 7 mm
Product instructions Fixing of standing seam holders on steel substructures 0,75-1,25mm
Packaging quantity 100
Packaging unit Pcs.
Packaging size (HxWxD) 76.00 mm x 85.00 mm x 62.00 mm
Net weight 539.00 g
Gross weight 569.00 g

Annexes

File (RP-T2 4,5_ETA-210306-en_16009_ROP.pdf, 8.34 MB)

File-attachments to an item.

File (DoP-002 en_a_16028_ROP.pdf, 126.21 KB)

File-attachments to an item.

Variants

on request
per 100 Pieces
Packaging quantity Drilling capacity Dimension Clamping area on steel
100 Component 1 [mm]: Steel 0.4 -1.0; Aluminium 0.5 -1.2 Component 2 [mm]: Steel 0.5 - 1.0; Aluminium 0.5 - 1.2 4.5 x 22 1 - 7 mm
on request
per 100 Pieces
Packaging quantity Drilling capacity Dimension Clamping area on steel
500 Component 1 [mm]: Steel 0.4 - 1.0; Aluminium 0.5 -1.2 Component 2 [mm]: Steel 0.5 - 1.0; Aluminium 0.5 - 1.2 4.5 x 22 1 - 7 mm
on request
per 100 Pieces
Packaging quantity Drilling capacity Dimension Clamping area on steel
100 Component 1 [mm]: Steel 0.4 - 1.0; Aluminium 0.5 - 1.2 Component 2 [mm]: Steel 0.5 - 1.0; Aluminium 0.5 - 1.2 4.5 x 25 1 - 8 mm

Last viewed