Image similar
RP-T2 Butt joint screw, Hexagon head with pressed-on washer, 4.5 x 22 mm, Partial thread (L1), AF 8, E14, Bimetal (stainless steel A2/steel), Nickel strike, zinc plated blue, lubricated, ETA-21/0306, 100 Pcs.
00D179B020-0450222-1
on request
per
100 Pieces
No availability information
Functions
Sales data
| Minimum order quantity | 100 Pieces |
| Order step | 100 Pieces |
Description
RP-T2 Butt joint screw
ADVANTAGES:
Keine nachträgliche Reinigung der Dachfläche durch spanfreie Verarbeitung = Zeit- und Kostenersparnis.
Hohe Auszugswerte auch in dünnwandigen Bauteilen. Durch die Dünnblechspitze werden im verdrängten Material mehr Gewindegänge geformt.
Aufgrund des gewindefreien Teils unter dem Schraubenkopf werden die beiden Bauteile ohne hohe Zwängung zusammengeführt.
Kein Hinterschnitt, somit kann die Schraube bei Bedarf auch wieder gelöst werden.
Fast screw-in speed due to double thread.
PRODUCT FEATURES:
Hexagon head
High power transmission
Hexagon head with pressed-on washer
High power transmission
Robust and insensitive to dirt
High contact pressure
No damage to the component by the screw-in tool
Ideal for head painting
EPDM sealing washer
Long-lasting
UV-stable
Prevents the ingress of water and provides a long-lasting seal for the connection
Double threaded thin sheet metal thread
High pull-out forces
Double thread guarantees fast screw-in speeds
Thin sheet metal tip
Chip-free penetration of thin sheet steel and aluminium
Higher holding forces, more threads involved due to funnel formation
FIELDS OF APPLICATION:
Fastening aluminium and steel profile sheets to aluminium and steel.
Stoßverbindungen, Befestigung von Kanteilblechen
PROCESSING RECOMMANDATIONS:
1. Inserting the screw with increased pressure and low rotation speed (approx. 200 revolutions)2. Pressure can be reduced as soon as the thread engages. The rotation speed can then be increased to approx. 1600 revolutions.3. Immediately before the sealing washer touches down, reduce the rotation speed considerably and tighten the sealing washer until it is slightly compressed.4. Recommended tightening torque for steel substructure approx. 3 Nm, under 0.8 mm material thickness 1 Nm.Recommended tightening torque for aluminium substructure approx. 1 Nm, under 0.8 mm material thickness 0.5 Nm.PRODUCT INSTRUCTIONS:
Fixing of standing seam holders on steel substructures 0,75-1,25mm
Features
| Article number | 00D179B020-0450222-1 |
| Code | 67075/3 |
| GTIN/EAN | 4005674670753 |
| Diameter d | 4.5 mm |
| Length L | 22 mm |
| Thread length L1 | 19 mm |
| Height of head k | 5 mm |
| Height h1 | 1.0 mm |
| Diameter dw | 5 mm |
| Diameter dn | 3.5 mm |
| Additional features | Thread-free section under the head |
| Core diameter d1 | 3.3 mm |
| Height tn | 2.0 mm |
| Drilling capacity | Component 1 [mm]: Steel 0.4 -1.0; Aluminium 0.5 -1.2 Component 2 [mm]: Steel 0.5 - 1.0; Aluminium 0.5 - 1.2 |
| Outer diameter Ds | 14.0 mm |
| Height h | 3.7 mm |
| Material | Bimetal (stainless steel A2/steel) |
| Surface | Nickel strike, zinc plated blue, lubricated |
| Drive type | AF |
| Drive size | 8 |
| Head shape | Hexagon head with pressed-on washer |
| Seal: Abbreviation | E14 |
| Seal: Type | Sealing washer |
| Seal: Material | Stainless steel A2/EPDM |
| Approval | ETA-21/0306 |
| Approval with annex | Z-14.1-4, annex 3.304a/3.305a Z-14.1-537, annex 3.2.21/3.1.30 ETA-21/0306, annex 28.10/28.11/28.20/28.30 |
| Drilling capacity | 1 x 1.0/2 x 0.8 mm |
| Processing speed | 1,600 U/min |
| Clamping area on steel | 1 - 7 mm |
| Packaging quantity | 100 |
| Packaging unit | Pcs. |
| Packaging size (HxWxD) | 76.00 mm x 85.00 mm x 62.00 mm |
| Net weight | 539.00 g |
| Gross weight | 569.00 g |
Variants
RP-T2 Butt joint screw, Hexagon head with pressed-on washer, 4.5 x 22 mm, Partial thread (L1), AF 8, E14, Bimetal (stainless steel A2/steel), Nickel strike, zinc plated blue, lubricated, ETA-21/0306, 100 Pcs.
|
| Packaging quantity | Drilling capacity | Dimension | Clamping area on steel |
|---|---|---|---|
| 100 | Component 1 [mm]: Steel 0.4 -1.0; Aluminium 0.5 -1.2 Component 2 [mm]: Steel 0.5 - 1.0; Aluminium 0.5 - 1.2 | 4.5 x 22 | 1 - 7 mm |
RP-T2 Butt joint screw, Hexagon head with pressed-on washer, 4.5 x 22 mm, Partial thread (L1), AF 8, E14, Bimetal (stainless steel A2/steel), Nickel strike, zinc plated blue, lubricated, ETA-21/0306, 500 Pcs.
00D179B020-0450226-1
No availability information
on request
per
100 Pieces
| Packaging quantity | Drilling capacity | Dimension | Clamping area on steel |
|---|---|---|---|
| 500 | Component 1 [mm]: Steel 0.4 - 1.0; Aluminium 0.5 -1.2 Component 2 [mm]: Steel 0.5 - 1.0; Aluminium 0.5 - 1.2 | 4.5 x 22 | 1 - 7 mm |
RP-T2 Thin sheet screw, Hexagon head with pressed-on washer, 4.5 x 25 mm, Full thread, AF 8, E14, Bimetal (stainless steel A2/steel), Nickel strike, zinc plated blue, lubricated, ETA-21/0306, 100 Pcs.
00D179B020-0450252-1
No availability information
on request
per
100 Pieces
| Packaging quantity | Drilling capacity | Dimension | Clamping area on steel |
|---|---|---|---|
| 100 | Component 1 [mm]: Steel 0.4 - 1.0; Aluminium 0.5 - 1.2 Component 2 [mm]: Steel 0.5 - 1.0; Aluminium 0.5 - 1.2 | 4.5 x 25 | 1 - 8 mm |
Related articles
RP-T2 Butt joint screw, Hexagon head with pressed-on washer, 4.5 x 22 mm, Partial thread (L1), AF 8, E14, Bimetal (stainless steel A2/steel), Nickel strike, zinc plated blue, lubricated, ETA-21/0306, 500 Pcs.
00D179B020-0450226-1
on request
No availability information
per
100 Pieces
RP-T2 Butt joint screw, Hexagon head with pressed-on washer, 4.5 x 22 mm, Full thread, AF 8, E16, Bimetal (stainless steel A2/steel), Nickel strike, zinc plated blue, lubricated, ETA-21/0306, 100 Pcs.
00D279B020-0450222-1
on request
No availability information
per
100 Pieces
RP-T2 Butt joint screw, Hexagon head with pressed-on washer, 4.5 x 22 mm, Full thread, AF 8, E16, Bimetal (stainless steel A2/steel), Nickel strike, zinc plated blue, lubricated, ETA-21/0306, 500 Pcs.
00D279B020-0450226-1
on request
No availability information
per
100 Pieces
