RP-T2 Thin sheet screw, Hexagon head with pressed-on washer, 6.0 x 38 mm, Full thread, AF 8, E16, Bimetal (stainless steel A2/steel), Nickel strike, zinc plated blue, lubricated, ETA-21/0306, 500 Pcs.

on request
per 100 Pieces
No availability information


Sales data

Minimum order quantity 500 Pieces
Order step 500 Pieces


RP-T2 Thin sheet screw


High pull-out values even in thin-walled components. More thread turns are formed in the displaced material owing to the thin sheet metal tip.

Fast screw-in speed due to double thread.

No subsequent cleaning of the roof surface is needed thanks to chip-free fastening = time and cost savings.


Hexagon head

High power transmission

Hexagon head with pressed-on washer

High power transmission

Robust and insensitive to dirt

High contact pressure

No damage to the component by the screw-in tool

Ideal for head painting

EPDM sealing washer



Prevents the ingress of water and provides a long-lasting seal for the connection

Double threaded thin sheet metal thread

High pull-out forces

Double-start thread guarantees fast screw-in speeds

Thin sheet metal tip

Chip-free penetration of thin sheet steel and aluminium

Higher holding forces, more threads involved due to funnel formation


Drilling screw for fixing aluminium and steel profile sheets to aluminium and steel substructures without chipping.
Butt joints, fixing edge part sheets


1. Inserting the screw with increased pressure and low rotation speed (approx. 200 revolutions)2. Pressure can be reduced as soon as the thread engages. The rotation speed can then be increased to approx. 1,600 revolutions.3. Immediately before fitting the sealing washer, reduce the rotation speed considerably and tighten the sealing washer until it is slightly compressed.4 Recommended tightening torque for steel substructure approx. 3 Nm, under 0.8 mm material thickness 1 Nm.Recommended tightening torque for aluminium substructure approx. 1 Nm, under 0.8 mm material thickness 0.5 Nm.


Article number 00D279B020-0600386-1
Code 67425/6
GTIN/EAN 4005674674256
Diameter d 6 mm
Length L 38 mm
Thread length L1 37.5 mm
Height of head k 5 mm
Total gross weight 5,035.00 g
Area of application Sheet steel connections: Steel on steel substructure
Component I.1 Thickness 0.4 - 1.0 mm
Component II.1 Thickness 0.4 - 1.25 mm
Height h1 1.0 mm
Diameter dw 6.8 mm
Diameter dn 5.1 mm
Core diameter d1 4.6 mm
Height tn 2.0 mm
Drilling capacity Component 1 [mm]: Steel 0.4 - 1.0; Aluminium 0.5 - 1.0 Component 2 [mm]: Steel 0.4 - 1.25; Aluminium 0.5 - 1.5
Outer diameter Ds 16.0 mm
Approval ETA-21/0306
Height h 3.7 mm
Material Bimetal (stainless steel A2/steel)
Surface Nickel strike, zinc plated blue, lubricated
Drive type AF
Drive size 8
Head shape Hexagon head with pressed-on washer
Seal: Abbreviation E16
Seal: Type Sealing washer
Seal: Material Stainless steel A2/EPDM
Approval with annex Z-14.4-668 ETA-21/0306, Annex 29.10/29.11/29.20/29.30
Drilling capacity 1 x 1.25/2 x 1.0 mm
Processing speed 1,600 U/min
Clamping area on steel 1 - 21 mm
Packaging quantity 500
Packaging unit Pcs.
Packaging size (HxWxD) 77.00 mm x 135.00 mm x 320.00 mm
Net weight 4,910.00 g


File (RP-T2 6,0_ETA-210306-en_16008_ROP.pdf, 8.39 MB)

File (DoP-002 en_d_16028_ROP.pdf, 130.07 KB)


on request
per 100 Pieces
Total gross weight Dimension Clamping area on steel Packaging quantity
798.00 g 6.0 x 25 1 - 8 mm 100
on request
per 100 Pieces
Total gross weight Dimension Clamping area on steel Packaging quantity
1,037.00 g 6.0 x 38 1 - 21 mm 100
on request
per 100 Pieces
Total gross weight Dimension Clamping area on steel Packaging quantity
5,035.00 g 6.0 x 38 1 - 21 mm 500

Last viewed