RP-TD-P Sandwich drilling screw, Hexagon head with pressed-on washer, 6.0 x 142 mm, Partial thread (L1), AF 8, E19, Bimetal (stainless steel A2/steel), RUSPERT®, Z-14.4-407, 100 Pcs.

on request
per 100 Pieces
No availability information


Sales data

Minimum order quantity 100 Pieces
Order step 100 Pieces


RP-TD-P Sandwich drilling screw - The chip-free


Patented geometry enables chip-free fastening. No subsequent cleaning of the roof surface necessary = time and cost savings.

Special drill element for reduction of splitting in wooden substructures.


Hexagon head

High power transmission

Hexagon head with pressed-on washer

High power transmission

Robust and insensitive to dirt

High contact pressure

No damage to the component by the screw-in tool

Ideal for head painting

EPDM sealing washer



Prevents the ingress of water and provides a long-lasting seal for the connection

Double threaded thread under head

Permanent, reliable sealing

Straight fitting - no visible dents

Cover sheet does not sag even with increased snow load and extreme temperature fluctuations

Safe access to the roof surface without the cover sheet sagging

Asymmetrical thread

Low screw-in torque

High pull-out forces


Precise and immediate screwing start

Minimised splitting effect in wood


Drilling screw for screwing sandwich elements to wooden substructures without chipping.
Roofing, façade construction


1. Inserting the screw with increased pressure and low rotation speed (approx. 200 revolutions)2. Pressure can be reduced as soon as the thread engages. The rotation speed can then be increased to approx. 1,600 revolutions.3. Immediately before fitting the sealing washer, reduce the rotation speed considerably and tighten the sealing washer until it is slightly compressed.4 Recommended tightening torque for steel substructure approx. 3 Nm, under 0.8 mm material thickness 1 Nm.Recommended tightening torque for aluminium substructure approx. 1 Nm, under 0.8 mm material thickness 0.5 Nm.


Currently regulated according to DIBt National technical approval - future transition to ETA
Currently regulated by national approval – will be switched to ETA in the future.


Article number 005317B097-0601422-1
Code 67459/1
GTIN/EAN 4005674674591
Diameter d 6 mm
Length L 142 mm
Thread length L1 64.5 mm
Height of head k 5.1 mm
Total gross weight 2,385.00 g
Area of application Roof and wall sandwich on metal and wooden substructures
Component I.1 Thickness 0.4 - 0.75 mm
Height h1 1.0 mm
Diameter dw 6.8 mm
Diameter dn 4.2 mm
Additional features Double threaded thread under head Special drill element (SPI)
Core diameter d1 3.9 mm
Height tn 3.0 mm
Diameter of drill tip dp 3.9 mm
Drilling capacity Component 1 [mm]: Steel 0.4 - 0.75 Component 2 [mm]: Wood
Outer diameter Ds 19.0 mm
Approval Z-14.4-407
Length of drill tip lp 8.5 mm
Height h 4.8 mm
Material Bimetal (stainless steel A2/steel)
Surface RUSPERT®
Drive type AF
Drive size 8
Head shape Hexagon head with pressed-on washer
Seal: Abbreviation E19
Seal: Type Sealing washer
Seal: Material Stainless steel A2/EPDM
Approval with annex Z-14.4-407, Annex 4.20 ETA-18/1136, Annex 31
Drilling capacity 0.4 - 0.75 mm
Processing speed 1,600 U/min
Minimum screw-in depth 42 mm
Clamping area on wood 65 - 95 mm
Packaging quantity 100
Packaging unit Pcs.
Packaging size (HxWxD) 77.00 mm x 135.00 mm x 320.00 mm
Net weight 2,260.00 g


File (RP-TD-(FK-)(P-)6,0xL_ETA-181136_en_50790_ROP.pdf, 3.33 MB)

File (Chip-free_installation_on_the_building_envelope_50911_ROP.pdf, 636.94 KB)


on request
per 100 Pieces
Total gross weight Dimension Clamping area on wood
1,857.00 g 6.0 x 99 45 - 52 mm
on request
per 100 Pieces
Total gross weight Dimension Clamping area on wood
2,214.00 g 6.0 x 126 50 - 79 mm
on request
per 100 Pieces
Total gross weight Dimension Clamping area on wood
2,385.00 g 6.0 x 142 65 - 95 mm
on request
per 100 Pieces
Total gross weight Dimension Clamping area on wood
2,605.00 g 6.0 x 162 65 - 115 mm
on request
per 100 Pieces
Total gross weight Dimension Clamping area on wood
3,015.00 g 6.0 x 185 85 - 138 mm

Last viewed