RP-T2 Butt joint screw, Hexagon head with pressed-on washer, 4.5 x 22 mm, Full thread, AF 8, E16, Bimetal (stainless steel A2/steel), Nickel strike, zinc plated blue, lubricated, ETA-21/0306, 100 Pcs.

00D279B020-0450222-1
on request
per 100 Pieces
No availability information

Functions

Sales data

Minimum order quantity 100 Pieces
Order step 100 Pieces

Description

RP-T2 Butt joint screw

ADVANTAGES:

Fast screw-in speed due to double thread.

PRODUCT FEATURES:

Hexagon head

High power transmission

Hexagon head with pressed-on washer

High power transmission

Robust and insensitive to dirt

High contact pressure

No damage to the component by the screw-in tool

Ideal for head painting

EPDM sealing washer

Long-lasting

UV-stable

Prevents the ingress of water and provides a long-lasting seal for the connection

Double threaded thin sheet metal thread

High pull-out forces

Double thread guarantees fast screw-in speeds

Thin sheet metal tip

Chip-free penetration of thin sheet steel and aluminium

Higher holding forces, more threads involved due to funnel formation

FIELDS OF APPLICATION:

Fastening aluminium and steel profile sheets to aluminium and steel.
Stoßverbindungen, Befestigung von Kanteilblechen

PROCESSING RECOMMANDATIONS:

1. Inserting the screw with increased pressure and low rotation speed (approx. 200 revolutions)2. Pressure can be reduced as soon as the thread engages. The rotation speed can then be increased to approx. 1600 revolutions.3. Immediately before the sealing washer touches down, reduce the rotation speed considerably and tighten the sealing washer until it is slightly compressed.4. Recommended tightening torque for steel substructure approx. 3 Nm, under 0.8 mm material thickness 1 Nm.Recommended tightening torque for aluminium substructure approx. 1 Nm, under 0.8 mm material thickness 0.5 Nm.

Features

Article number 00D279B020-0450222-1
Code 67076/0
GTIN/EAN 4005674670760
Diameter d 4.5 mm
Length L 22 mm
Thread length L1 19 mm
Height of head k 5 mm
Height h1 1.0 mm
Diameter dw 5 mm
Diameter dn 3.5 mm
Additional features Thread-free section under the head
Core diameter d1 3.3 mm
Height tn 2.0 mm
Drilling capacity Component 1 [mm]: Steel 0.4 - 1.0; Aluminium 0.5 - 1.2 Component 2 [mm]: Steel 0.5 - 1.0; Aluminium 0.5 -1.2
Outer diameter Ds 16.0 mm
Height h 4 mm
Material Bimetal (stainless steel A2/steel)
Surface Nickel strike, zinc plated blue, lubricated
Drive type AF
Drive size 8
Head shape Hexagon head with pressed-on washer
Seal: Abbreviation E16
Seal: Type Sealing washer
Seal: Material Stainless steel A2/EPDM
Approval ETA-21/0306
Approval with annex Z-14.1-4, annex 3.304a/3.305a Z-14.1-537, annex 3.2.21/3.1.30 ETA-21/0306, annex 28.10/28.11/28.20/28.30
Drilling capacity 1 x 1.0/2 x 0.8 mm
Processing speed 1,600 U/min
Clamping area on steel 1 - 7 mm
Packaging quantity 100
Packaging unit Pcs.
Packaging size (HxWxD) 76.00 mm x 85.00 mm x 62.00 mm
Net weight 589.00 g
Gross weight 619.00 g

Annexes

Datei (RP-T2 4,5_ETA-210306-en_16009_ROP.pdf, 8.34 MB)

Datei (DoP-002 en_a_16028_ROP.pdf, 126.21 KB)

Variants

on request
per 100 Pieces
Packaging quantity Drilling capacity
100 Component 1 [mm]: Steel 0.4 - 1.0; Aluminium 0.5 - 1.2 Component 2 [mm]: Steel 0.5 - 1.0; Aluminium 0.5 -1.2
on request
per 100 Pieces
Packaging quantity Drilling capacity
500 Component 1 [mm]: Steel 0.4 -1.0; Aluminium 0.5 - 1.2 Component 2 [mm]: Steel 0.5 -1.0; Aluminium 0.5 - 1.2

Last viewed